CLR-10

Text
Established 1920

CLR-10

SWITLIK is proud to offer our new CLR-10 MK-II Life Raft. The CLR 10 MK-II Life Raft is identical to our 10 Person Capacity U.S.C.G. Approved/SOLAS MK-II Life Raft except the SOLAS equipment is replaced with a U.S.C.G. Approved Coastal Service equipment pack. This allows the CLR-10 to be packed into a smaller, lower profile, flat fiberglass container. Additional survival equipment appropriate to your vessel, crew, and area of operation should be packed in a separate Abandon Ship Bag.

The CLR-10’s heat-sealed 16oz. per square yard Nylon fabric, urethane coated inside and out, and over-lapped seams taped inside and out, is the toughest in the industry. The CLR 10 features extra large diameter buoyancy tubes and a rigid boarding step in addition to a boarding ladder.

Twin “Gull-Wing” doors facilitate boarding from higher freeboard vessels and the large openings provide excellent ventilation with 3600 lookout capability. Outer furlable Storm Doors provide increased protection for the occupants. The CLR-10’s two counter-opposed canopy support arch tubes provide head and shoulder room for all occupants and inflate automatically.

Four large capacity rectangular cross-section Ballast Pockets offer greater stability than triangular cross-section “Icelandic” pockets of equivalent length. An optional independent Heat Sealed Inflatable Floor keeps occupants above and away from water in the Life Raft. An anodized marine grade aluminum Deck Mounting Cradle, and Hydrostatic Release are also available as options.

Click here to downoad the CLR-10 brochure.

STANDARD FEATURES	STANDARD EQUIPMENT
Inflation / Mooring Line (50 ft)	USCG Approved Waterproof Flashlight
CO2 / N2 Inflation System (-220F to +1500F Operating Range)	Spare Flashlight Bulb
Mil Spec. Sea Anchor (automatically deployed)	Spare Flashlight “D” Cell Batteries
High Tensile Strength Towing/Mooring/Inflation Line Attachment Points	Buoyancy Chamber Repair Clamps
Righting Strap	Sponges
Lifelines (inner)	Bailer
Lifelines (outer)	USCG/SOLAS Red Handheld Distress Flares
Floating/Heaving Line (100 ft.)	Signaling Mirror
Furlable Exterior Storm Doors	Signaling Whistle
Interior Light	Anti-Seasickness Pills
Exterior Locator Light	Paddles
Rain Water Collector	Pressure Relief Valve Plugs
Pressure Relief Valves	Manual Inflation Pump
Large Capacity Rectangular Ballast Pockets	Floating Safety Knife (mounted on raft tube)
Fluorescent Orange Canopy with Blue Inner Coating	Utility Cord
SOLAS Retro-Reflective Tape
Boarding Ladder	OPTIONAL FEATURES
Rigid Boarding Step	Anodized Aluminum Deck Mounting Cradle
Raft Use Instructions	USCG Approved Hydrostatic Release with Weak Link
Boarding Handholds	Independent Heat Sealed Inflatable Floor
Twin Canopy Support Arches	KATADYN Survivor 06 Reverse-Osmosis Water Maker
Manual Topping Off Valves	ACR 406 Mhz EPIRB

SPECIFICATIONS
Model Number	CLR-10H-USCG-MK-II
United States Coast Guard Approval #	160.051/330
Rated Capacity	10 Person

Upper Buoyancy Tube Diameter	10.00 in.
Lower Buoyancy Tube Diameter	11.50 in.
Freeboard	21.50 in.
Raft Inflated Dimensions	10 ft. 1 in. L x 8 ft. 8 in. W x 4 ft. 4 in. H
Floor Area
Total	40.00 ft.2
Per Person	4.00 ft.2

Shipping Dimensions
Total	2,180 lbs.
Per Person	218 lbs.

Operating Pressure	2 p.s.i.
Operating Temperature Range	- 22°F to +150°F

Life Raft Hard Container Material	Hand-Laid Fiberglass
Aluminum Cradle Material	Anodized AL-6463-T55
Buoyancy Tube Fabric	USCG Approved 16 oz./sq. yd. Urethane Coated Nylon Base Cloth (Exceeds MIL-C-17415-16AA)
Inflation System	Carbon Dioxide (CO2) & Nitrogen (N2) gas mixture
Hard Container Dimensions *	36.50 in. L x 24.0 in. W x 17.0 in. H
Weight in Hard Container **	145 lbs.
Shipping Weight **	155 lbs.
* Optional Cradle will extend the overall installed height and width dimensions of the Hard Container by approximately two inches	** Weight may vary depending upon options· Specifications Subject to Change Without Notice

Back to Life Rafts

Service Stations